Plataforma Compatible con Arduino DFRobot 4WD con Codificadores

DFRobotSKU:RB-Dfr-67
Número de fabricante: ROB0025

Precio  :
Precio de oferta $49.90

Envío calculado al finalizar la compra

Stock  :
Solo quedan 2 unidades

Pagos y Seguridad

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

Descripción

Compatible con Hitec 311,422 servo y Kit Pan / Tile
Interruptor de sensores infrarrojos instalado
Voltaje: +4.5 a 6V
Velocidad máxima: 68 cm / s

La Plataforma Compatible con Arduino DFRobot 4WD con Codificadores se utiliza  ampliamente en la plataforma de panel de control creada por el mundo. Este método de dispositivo tiene fuerza cara a obstáculos y capacidad de escalada gracias a su cuerpo de aleación de aluminio de alta resistencia. Cuenta con un material acrílico grueso para eliminar los defectos del material acrílico fino, frágil y pesado. El potente rendimiento del motor y el movimiento flexible y rápido es especialmente indicado para césped, gravilla, arena o una acera inclinada.

Plataforma Compatible con Arduino DFRobot 4WD con Codificadores

• Partes estructurales del cuerpo: 1 set
• Ruedas de goma de alta calidad: 4
• Micro motor de engranaje: 4
• Kit de codificador: 1 set
• Interruptor de encendido: 1
• Puerto de carga: 1
• Línea de instalación 1 arriba
• Cilindros: 4
• Tornillo de montaje: 1 bolsa
• Soporte de montaje del interruptor de proximidad por infrarrojos: 3


Customer Reviews

Based on 2 reviews
0%
(0)
100%
(2)
0%
(0)
0%
(0)
0%
(0)
S
Steve
Very good starter chassis

Most of the chassis is very easy to assemble. While the instructions are IKEA-like in their simplicity you should be able to figure it out. As mentioned by William, some of the hole placement needs to be considered but its not a big deal. Also, the screws for the encoder fans are pretty snug. Be careful not to break them. All in all, this is a very good starter kit. We are using them in our Robotics class at the high school.

W
William
Easy To Assemble.

Only a few cons with what I received: 1.) The encoders don't fit on the front wheels unless you use extra hardware. Not a deal killer...but you have to do some thinking. 2.) The drill holes for the Arduino are places too close to the servo hole. If you put a pan/tilt mount in this space you'll hit the Arduino board as it spins around. I simply drilled holes closer to the back of the robot. Problem solved. 3.) The motors WILL require you to solder capacitors on them. Do this BEFORE you ever start mounting them to the unit. You've been warned. Otherwise...I'm enjoying it.

Estimar envío

También le puede interesar