Controlador de Motor Dual de 1.2A Compatible c/ Arduino para LSS Lynxmotion SES-V2 (LSS-2MC)
Ahorre $0.00
LynxmotionSKU:RB-Lyn-1110
Número de fabricante:
LSS-2MC-KT
No reviews
Comparta este producto
Pagos y Seguridad
Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Descripción
Controlador de Motor Dual de 1.2A Compatible c/ Arduino para LSS Lynxmotion SES-V2 (LSS-2MC)
Módulo de controlador de motor de puente H de 6-21 V DC de canal doble, 1,2 A
Compatible con Lynxmotion Smart Servo (LSS)
Entrada: Protocolo serie Lynxmotion (cuando se usa el código Lss2MC)
Cargador de arranque Arduino Nano instalado y compatible con Arduino IDE
El Controlador de Motor Dual de 1.2A Compatible c/ Arduino para LSS Lynxmotion SES-V2 (LSS-2MC) (Lynxmotion Smart Servo To Motor Controller) fue diseñado como una placa programable Arduino multipropósito destinada a "cerrar la brecha" entre un bus serial de Lynxmotion Smart Servo (LSS) y uno o dos dispositivos electromecánicos que funcionan con entrada PWM como motores DC con escobillas (utilizados para girar ventiladores, bombas o ruedas, por ejemplo) o LED.
El chip controlador de motor incorporado también permite el control de un motor paso a paso bipolar usando los cuatro pines. Aunque se incluye un programa predeterminado cuando se envía, se puede reprogramar utilizando el software Arduino IDE estándar para comunicarse con el controlador de motor integrado que actúa como una placa Arduino estándar.
Ejemplo de uso del LSS-2MC con el LSS
Características
Controlador de motor dual 1.2A Puente-H (MP6508GR-P)
Conector USB tipo C
Los 2 conectores LSS permiten la conexión en cadena
Pin de entrada/salida A3 debajo del USB tipo C (solo pads de soldadura/despobladas)
LED (rojo): Actividad serial USB Tx-Rx
LED (verde): LED de alimentación (PWR)
Cargador de arranque Arduino Nano instalado y compatible con Arduino IDE
Patrón de montaje de Lynxmotion Smart Servo (LSS)
Mismo factor de forma que el LSS - Power Hub / LSS - Placa 2IO / LSS - Placa 5VR
1x Módulo LSS-2MC
1x Cable serie LSS de 150 mm
2x Tornillos de cabeza Phillips negros de 2-56 x 1/4 pulgadas.
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.