Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Descripción
Kit de Servo Actuador Lineal Kitronik
Presenta el servo FS90 azul de 180 grados y las fijaciones
Tiene una relación de transmisión de 2:3
Se puede usar con placas como micro:bit, Arduino o RaspberryPi
Proporciona movimiento horizontal o vertical
Crea un par de 1,5 Kg/cm a 6 V / 1,3 Kg/cm a 4,8 V
El Kit de Servo Actuador Lineal Kitronik presenta un servo Fitec en miniatura de gran valor y convierte el movimiento circular del servo suministrado en movimiento en línea recta, en un sentido y luego en el otro. Es ideal para la conmutación de robots, diagramas o puntos de tren. Se puede montar en un proyecto para proporcionar movimiento horizontal o vertical.
El actuador lineal se ha cortado de una hoja Perspex azul claro de 5 mm, el mismo material que el utilizado en nuestra la Klaw con servomotor. Hay una gama de orificios de montaje en cada extremo de la rejilla que incluye un orificio de 3 mm, un cuadrado de 3 mm y orificios de servo horn estándar adecuados para alambre (1mm de diámetro) y tiene aproximadamente 20mm de recorrido. Tiene una relación de transmisión de 2:3 y el par de parada del servo provisto es de 1,5 Kg/cm a 6 V y 1,3 Kg/cm a 4,8 V.
A Good Design, Experiment, and Educational Product
If you are learning about the capabilities of servos then this product is a good way to explore one of the ways servos can be used. The rack and pinion application was a pleasant surprise to discover for this device type. It does not provide precise motion but is more like a strong motion. The Kitronik Linear Actuator Kit was very useful to me in my design work.
C
Cecilia
Great for what it is
I've tried 3D printed adapters to make servos into linear actuators before, and, in my experience, they are cumbersome, strip easily, and unreliable. This little kit is not perfect, but it's super easy to assemble and it works well. I used it to make an easy blink mechanism for a robot. Just experiment a bit with the screws so they are not too tight and not too loose.
D
Daniel
Not bad
Not bad
Estimar envío
Politica de Reembolso
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.