GM3 - Motor de Engranaje 3 - Eje de 90 grados

Name: GM3 - Motor de Engranaje 3 - Eje de 90 grados
Brand: Solarbotics
SKU: RB-Sbo-02
Price: 6.96 USD
Availability: InStock
Rating: 3.88 (8 reviews)

SolarboticsSKU:RB-Sbo-02
Número de fabricante: GM3

Precio :

$6.96

Envío calculado al finalizar la compra

Stock :

En existencia, 7 unidades

Cantidad :

Comparta este producto

Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

• Voltaje: 5vdc
• RPM: 38
• Par de apriete: 50oz.in (3,6 kg-cm)
• Actual: 52mA
• Velocidad: 360 grados/1.6 segundos
• Reducción: 224: 1
• Longitud del Eje: 7mm doble plano (ambos lados)
• Tamaño: 70x22.5x37 mm
• Peso: 37gramos (1.31oz)

Este GM3 - Motor de Engranaje 3 - Eje de 90 grados es muy comparable a los de un servo de poder, ¡a una fracción del costo! Se adapta perfectamente a las ruedas de plástico GMPW y GMW.

Este motorreductor gira 360 grados cada 1.6 segundos (solo un poquito más lento que un servo), a 5V, sacando 600mA en bloqueo (funcionamiento libre a 52mA). ¡Con un eje de salida doble plano de 7mm (evite utilizar la salida "D", no está destinada a soportar cargas de rotación), y un embrague incorporado (con una limitación de 60 in.oz, pero fácilmente "bloqueado"), así como orificios para tornillos de montaje incorpoados, puede ver por qué nos gustan estos motores!

Basado en el diseño original de Mark Tilden para su uso en BIO-Bugs (GM3 ahora son usados para el Robosapien), estos motores son la próxima generación con una variedad de mejoras tales como ejes de salida doble y un motor de corriente más baja.

GM3 Motor de Engranaje es compatible con el Codificador de Rotación de Solarbotics Watchers Wheel. Úselo si necesita controlar un robot para calcular el valor muerto, rastrear la odometría (distancia recorrida), un motor bloqueado, o cerrar el circuito de retroalimentación para la posición/velocidad/aceleración.

Good motor and gear, bad electrical connections

Motor, gears and shaft work well, recommend buying recommended wheel attachments together to ensure fit. Warning: Electrical leads are extremely delicate and will not survive more than one or two solder attempts. Ensure wires are secured after connections made, as this is how our electrical leads tore off due to wire movement.

good

This was my first puchase online from the RobotShop, but it will most certainly not be my last. The motor I purchased shipped the same day and arrived 2 days later! Plus, it was exactly as advertised and works like a charm. Thanks RobotShop --- keep up the great work!!

Good Quality for the Price, but Difficult to Work With

Nice little motor. In fact all of the GM series motors are great - as long as you don't need to connect motor shaft to anything "off the shelf", i.e. gears, pulleys, couplings, shafts, wheels ... well pretty well anything for that matter. Problem is these guys have a 7mm dual flat shaft. Solarbotics has a GMW wheel that will connect, but unless you're willing to build something that connects to the GMW, you are pretty well euchred. You could make a shaft adapter on a 3D printer - if you have one - but this would be unsuitable for a commercial quality product. The only way I have been able to connect the shaft, is by turning a shaft coupling, drilling a 6mm axial hole, reaming it out to 7mm, and then using two set screws, 180 degrees apart to locate on the flats. But this is a lot of work - might as well pay a few $$$ extra and buy a motor with a round shaft. Otherwise excellent quality, but solder lugs break easily rendering motor as scrap.

Excellent but...

Bought this as a replacement for the 90 degree yellow motors I have on a robot, based on the advice offered in this forum pots: https://www.robotshop.com/community/forum/t/moving-from-cheap-yellow-motors-to-low-cost-dc-gear-motors/25901. The advice looked genuine to me and appeared to be authoritative (as if from someone working for Robot Shop). When the new motors arrived they did indeed fit into exactly the same mountings as my previous yellow motors but the drive shaft is a completely different size, meaning new wheels and tyres. Now I've done that they do a good job but, they are not a direct replacement.