Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Descripción
Tarjeta de detección de audio pequeña y fácil de usar con 3 salidas diferentes
Proporciona indicación binaria de sonido y representación analógica de amplitud
Ancho de banda de ganancia de 1.2MHz
Cumple con RoHS
El Detector de Sonido - LMV324 es una placa de detección de audio pequeña y muy fácil de usar con tres salidas diferentes. El detector de sonido no solo proporciona una salida de audio, sino también una indicación binaria de la presencia de sonido y una representación analógica de su amplitud. Las 3 salidas son simultáneas e independientes, por lo que puede usar tantas como quiera a la vez. La salida de la envolvente le permite leer fácilmente la amplitud del sonido simplemente midiendo la tensión analógica. La ganancia puede ajustarse con una resistencia de agujero pasante, para cambiar también el umbral del pasador de salida binario (compuerta). Cada una de las tres señales de salida está presente en el cabezal de 0.1" en el borde de la tarjeta. Están activas simultáneamente. Si no está utilizando una en su aplicación particular, simplemente deje ese pin desconectado.
Doesnt work properly even on a stabilized power supply. High distortion noise on the audio output signal obviously prevents the circuit from delivering high quality output signals. And even the range for power supply is very narrow form lets say 4.5 V to approx. 7 V. On an USB-Power supply the device gets "unstable", does not work at all. Periodic very high distortion signal on the audio output and gate always on high. Really, such a simple device can be built with constructions sets from years 2000 and following based on LMV324. Sparkfun: Please add features to prevent high frequency input noise supression and make the circuit more stable for the power supply. Now I bought a device for 3 EUR. Much cheaper and more reliable.
J
Jeff
An excellent, easy to use, board for triggering on acoustic events.
I'm using this board to acoustically trigger my high-speed camera (a Chronos 1.4). This is an inexpensive, accurate, and easy to build solution useful for initiating an event upon a clap, bang, or other coincident sounds. This board is able to output a TTL-compatible pulse (from GATE) when it detects a sound. I powered the board with three AA batteries = 4.5 V at GND and VCC). The sensitivity of the board as shipped was suitable for my work, but, you can adjust the sensitivity (so it detects louder or softer sounds) by adding/removing an onboard resistor (marked GAIN=R17 and R3). The GATE output is a TTL pulse with a duration equal to the duration of the sound envelope of the input. The two other outputs are useful if you want to capture the oscillogram (AUDIO) or the ENVELOPE (which is a low-pass filtered version of the oscillograph). I can tell you that the oscillographic output is not necessarily a high-fidelity capture of the input waveform, but, I can see how it can be useful for many projects. It’s quite a versatile and robust board. My plan is to incorporate this into a nice project case with BNC output so I can easily cable it to my camera in the future. You can find additional documentation about this board easily online.
Estimar envío
Politica de Reembolso
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.