Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Descripción
Patillas de E / S configurados para operar a 5V
Permite una forma simple de conectar dispositivos de interfaz TTL a USB
Se puede usar para programar su Arduino Pro, Pro Mini y Lilypad
Bien protegido contra los elementos
Cumple con RoHS
El Cable FTDI de USB-a-TTL (serie) 5V es un convertidor de USB a serie (nivel TTL) que permite conectar de manera simple dispositivos de interfaz TTL a USB. Las patillas de E / S de este cable FTDI están configuradas para operar a 5V. El cable FTDI está diseñado alrededor de un FT232RQ, que está alojado en un conector USB A. El otro lado del cable termina con un conector de 6" y paso de 0,1" con estas patillas: RTS, RX, TX, 5V, CTS, GND (RTS es el cable verde y GND es negro).
Este cable tiene la misma función de patillas y funciones que la placa FTDI Basic Breakout de Sparkfun; puede usarlo para programar su Arduino Pro, Pro Mini. Para usar con esas placas, alinee los cables negro y verde del cable FTDI con las etiquetas 'BLK' y 'GRN' en la PCB. Existen ventajas y desventajas para el cable FTDI frente al básico FTDI. El FTDI Basic tiene excelentes indicadores LED, pero requiere un cable miniB. El cable FTDI está bien protegido contra los elementos, pero es grande y no puede integrarse fácilmente en un proyecto. El FTDI Basic utiliza DTR para provocar un restablecimiento de hardware donde el cable FTDI utiliza la señal RTS.
Does what it says on the tin. If you need an "FTDI" controller, that is, to plug a serial device into a USB port and send/receive data to it, then this is the droid that you are looking for.
a
alan
so cool
Very efficient cable. Highly recommended!
W
Ward
as advertised
I use this cable to interface with xBee boards, works well.
J
Jeff
Great Customer service!
A Must have
S
Sylvain
Works great
I bought this cable in order to upload a Arduino sketch to a standalone micro-controller. It works great. You must pay attention on the wiring though in order to reset the IC before the upload process starts.
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.