PhidgetsSKU:RB-Phi-122
Número de fabricante:
3137_0
6 reviews
Comparta este producto
Pagos y Seguridad
Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Descripción
Capacidad de carga máxima: 200kg
Sensor de puente de Wheatstone
Se conecta al Interfaz de Sensor Wheatstone Bridge PhidgetBridge de Phidgets (Con Carcasa)
Cumple con RoHS
La Célula de Carga de Botón de 200 Kg se usa en aplicaciones que requieren un factor de forma delgado. La parte inferior de la celda de carga está atornillada, y la fuerza se aplica al botón en la parte superior. Al cargar solo el botón, que está ligeramente redondeado, es menos sensible a los errores que resultan de la carga y no empujando exactamente derecho hacia abajo. Está diseñada para medir una fuerza específica e ignora otras fuerzas que se aplican. La señal eléctrica emitida por él es muy pequeña y requiere una amplificación especializada. Afortunadamente, PhidgetBridge realizará toda la amplificación y medición de la salida eléctrica.
Only 1 out of 3 worked correctly when configured. The others are useless.
My previous order of this product worked fine. This time around only one worked when configured correctly.
M
Mehtab
Satisfied Customer
My order was deliver on time. The quality of the product is was as per my expectation. Thank you RobotShop
A
Alex
Great product and great service
The quality of products is very high and the service is even greater!
H
Harry
Works perfectly!
Hooked it up to my DAQ and it was reading well. Would buy again!
J
JC
Great Product!
I purchased several of these load cells to connect to an Arduino Uno. I used two of these together with an ADS1115 16 bit ADC with programmable gain. Worked perfectly with nice resolution! I will be purchasing more.
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.