Controlador de Motor Dual Regenerativo (R/C) Sabertooth 5A R/C 6-18V

Dimension EngineeringSKU:RB-Dim-30
Número de fabricante: Sabertooth 2x5 R/C

Precio  :
Precio de oferta $59.95

Envío calculado al finalizar la compra

Stock  :
En existencia, 14 unidades

Pagos y Seguridad

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

Descripción

  • Controlador de Motor Dual : 5A, 6-18V
  • Control de R/C con cables servo
  • Unidad regenerativa síncrona
  • Frecuencia de conmutación ultrasónica
  • Protección térmica y sobre corriente
  • Modo de protección de la batería de litio

El Controlador de Motor Dual Regenerativo (R/C) Sabertooth 5A R/C 6-18V especialmente optimizado para usarlo en vehículos controlados por radio. Es adecuado para pequeños robots, automóviles y embarcaciones, y especialmente adecuado para las clases de lucha de robots de pelea Antweight y Beetlewight.

Controlador de Motor Dual Regenerativo (R/C) Sabertooth 5A R/C 6-18V-  Haz click para Ampliar

Fuera de la caja, puede suministrar dos motores CC con cepillos de hasta 5A cada uno. Las corrientes máximas de 10A se pueden lograr durante unos segundos. La protección contra sobrecorriente y térmica significa que nunca tendrá que preocuparse por matar al controlador con bloqueos accidentales o por conectar un motor demasiado grande.

CaracterÍsticas

  • Incluye control exponencial, autocalibración y mezcla incorporada.
  • El modo de operación se establece con los interruptores DIP integrados.
  • Controlador de motor regenerativo síncrono
  • Protección térmica y contra sobrecorriente
  • Construido en 5V BEC puede proporcionar energía a un microcontrolador o receptor R/C.
  • El modo de corte de litio permite una operación segura con paquetes de iones de litio / polímero
  • Frecuencia de conmutación ultrasónica
  • Funcionamiento silencioso.
  • Controlador de motor Dimension Engineering 2x5 R/C
  • Hardware de montaje (2 tornillos, 2 tuercas)
  • Guía de inicio rápido
  • Ejemplo de diagrama de cableado del vehículo R/C
  • Tamaño: 1.8 "x 1.6" x 5"
  • 45 x 40 x 13mm
  • Servo cables de 5" (13cm)

Controlador de Motor Dual Regenerativo (R/C) Sabertooth 5A R/C 6-18V- Haz click para Ampliar

  • 18g / 0.6oz
  • Voltaje de Entrada: 6V a 18V
  • 6-12 células NiMH o NiCd
  • 2s-4s LiPo
  • 6V o 12V de ácido de plomo (¡no 18+V de ácido de plomo!)
  • 5A continuo por canal, 10A pico

Customer Reviews

Based on 7 reviews
57%
(4)
14%
(1)
29%
(2)
0%
(0)
0%
(0)
Y
Youa
Amazing product.

Bought to be put into one of Lesu Skid Steer. I love how it was simple/ small to install. Fits perfectly inside. Works perfectly as well. Enough to power the dual-motor with no issues. Overall would buy again if needed.

R
Robo
not best

Not the Best Controller. Battery eliminator circuit has poor performance. If you plan to implement 1 or 2 servos to your receiver, good luck . I should have tried the 1amp bec version of this controller. It would be nice if they provided more info regarding the specs of the bec

R
Ron
Speed control

Good product. Easy to hook up and does what it is supposed to do. A little pricey but worth it.

W
Wayne
All good

I installed one of the two I ordered into a Bruder D-4 tractor. I adjusted the end points and it works well. The other one I installed into a Tonka tractor and it also works well. I am very confident it will work for a long time.

A
Anthony
It's an OK system

I used this with a Tamiya dual motor gearbox. While this did provide the power to the small motors that are in that kit, it was prone to brown-outs. In addition to the brownouts, The unit frequently overheated, & the thermal protection would activate. That's a GOOD thing it has, BUT......with those small motors, it's also a BAD thing. They're so tiny, they shouldn't overheat the controller. Perhaps I can re-purpose the 2X5 to power the linear actuators on the Bruder D5 conversion to a working RC that I'm building, rather then as the power for the drive motors in the gearbox. HOPEFULLY by using this unit in an application that's not under constant load, I can make use of it.

Estimar envío

También le puede interesar