LynxmotionSKU:RB-Lyn-871
Número de fabricante:
PS2-DL
2 reviews
Comparta este producto
Pagos y Seguridad
Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Descripción
Tablero de conexión del conector PS2
Conectores pre-soldados
Compatible con el controlador inalámbrico Lynxmotion PS2 V3
Agujeros compatibles con Arduino y Lynxmotion Electronics
Hardware de montaje incluido
La Tarjeta Adaptadora de Conector PS2 de Lynxmotion está diseñada para ser utilizada con el control remoto inalámbrico Lynxmotion PS2 V3. A diferencia de los controles remotos Lynxmotion V1.5 y V2, el V3 no necesita un cambio de nivel, por lo que los pines se dividen uno a uno. Las pestañas de separación le permiten montar la placa en la electrónica Lynxmotion (el mismo espacio entre agujeros), mientras que los otros dos agujeros le permiten montar la placa en un Arduino normal. El conector PS2 y los cabezales de 90grados están pre-soldados. Tenga en cuenta que esto no se puede usar con los controles remotos inalámbricos Lynxmotion PS2 V1.5 o V2, ni tampoco se ha probado con receptores PSL Lynxmotion PS2.
Works as advertised. The pins are pre soldered so you need to replaced them (or straighten them) if a 90 degree set up isn't what you need (i.e. a breadboard) and is the only reason for 4 stars vs. 5.
K
Kevin
Works Perfect
Works Perfect, using it for a hexapod run off an Arduino nano. PLEASE consider making 3d models available for your products! Some of us model and 3d print or machine parts to match your parts. :) I spend a lot of time making my own models of your parts.
Estimar envío
Politica de Reembolso
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.
