Actuador Lineal con Recorrido de 2", Fuerza de 150 lbs

Firgelli AutomationsSKU:RB-Fra-13
Número de fabricante: FA-150-S-12-2

Precio  :
Precio de oferta $114.98

Envío calculado al finalizar la compra

Stock  :

Reabastecimiento pronto Ver fecha de entrega

Avisarme cuando este producto esté disponible

Pagos y Seguridad

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

Descripción

Fuerza: 150 libras
Recorrido: 2 "
Voltaje nominal de 12vdc
Consumo de corriente de 3 amperios a plena carga
Interruptores de fin de carrera incorporados, no movibles
Velocidad sin carga: 10 mm / seg (0,4 "/ seg)
Proporción de metal en engranaje: 20: 1
Clasificación IP54 (resistente a salpicaduras y polvo)
Arnés de 2 hilos, polaridad inversa para cambiar de dirección

El Actuador Lineal con Recorrido de 2", Fuerza de 150 lbs de Firgelli Automations es ideal para aplicaciones que requieren un funcionamiento lineal silencioso y suave. Vienen con interruptores de límite incorporados (no móviles), carcasa de aluminio, 2 horquillas, una en cada extremo.

¿Necesita protección a prueba de agua para su actuador? Agregue un Protector de Goma para Actuadores Lineales Clásicos a su diseño (se vende por separado)

Dimensiones de orificio a orificio:
Longitud contraída: 6.3 pulgadas
Longitud extendida: 8.3in

Actuador Lineal de Fuerza de 150 lb de Carrera de 2 ''
 

Customer Reviews

Based on 8 reviews
13%
(1)
88%
(7)
0%
(0)
0%
(0)
0%
(0)
J
John Paul
Good quality for the money

Been using these for years, high force at lower amperage than similar linear actuators. The extendable end of the rod is made of two fused parts (an outer tube with an inner core) which makes modification difficult but when being used just with the standard rod mount works perfectly.

J
John Paul
Works alright

One thing I should note is that the stroke length is 1-7/8" not 2. So prepare your mechanisms accordingly. I've used these often and this is common to every one..

J
John Paul
Good value for the output

Works well with AA NiMH rechargeable battery packs. Maximum current from good NiMH batteries is about 4 amps and this actuator draws up to 3 amps.

J
John Paul
Adequate quality

Shaft has a little play in the mechanism, not suitable for side loads unless externally supported. Weight measured on a digital scale is 0.811 kg Contrary to the dimensions present here, the shaft diameter is actually 0.784 inches. Overall the actuator functions well when you compensate for the dimensional discrepancies. I've been using these for years.

J
John Paul
Adjustable shaft

The length of the shaft can be slightly adjusted by rotating. Probably adjust the stroke by about 1/8 inch. Which is nice if you want to fine tune the beginning or end position in your mechanism.

Estimar envío

También le puede interesar