ServoCity Stingray-7 Servo Gearbox (1.19 Sec/60°, 8.6 rpm, 2450 Oz-in Torque, 257° Rotation)

ServoCitySKU: RB-Sct-2002
Manufacturer #: parent-stingray-7

Price  :
Sale price $129.99

Shipping calculated at checkout

On Demand See due date

This is an On Demand item and is not normally stocked. We will order it for you along with our next purchase from the supplier.

* Delays depend on the order frequency from each supplier and the approximate arrival date is indicated in the due date. Returns are not accepted on On Demand and Clearance Items except when they are found defective, in which case the product may be repaired or replaced at RobotShop's discretion.

Payments and Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • ServoCity Stingray-7 Servo Gearbox (1.19 Sec/60°, 8.6 rpm, 2450 Oz-in Torque, 257° Rotation)
  • Enhances torque with 7:1 gear ratio
  • Offers versatile mounting with M4 threaded holes
  • Supports 257° max rotation
  • Compatible with Arduino and Raspberry Pi
  • Allows mode switching with servo programmer

The ServoCity Stingray-7 Servo Gearbox (1.19 Sec/60°, 8.6 rpm, 2450 Oz-in Torque, 257° Rotation) is powered by the goBILDA® 5-Turn Torque Servo, featuring a 7:1 external gear ratio that enhances torque and precision while reducing the range. This gearbox is fully assembled and ready for installation, with the servo mounted to isolate the load to a steel hub-shaft supported by ball bearings, thereby protecting the servo from axial loads. The gearbox offers versatile mounting options with M4 threaded holes compatible with the goBILDA® system. The hub-shaft's 8mm REX bore can drive an 8mm REX shaft or serve as a wire pass-through. The control signal remains identical to a standard servo, allowing it to connect to various controllers such as an R/C receiver, Arduino, Raspberry Pi, or REV controller. The servo is FTC legal as it remains unmodified. Available in both feedback and continuous modes, the gearbox allows for mode toggling with a servo programmer, thanks to the dual-mode capability of the goBILDA® 5-Turn Torque Servo.

Stingray-7 Servo Gearbox Main Product View

  • 1x ServoCity Stingray-7 Servo Gearbox (1.19 Sec/60°, 8.6 rpm, 2450 Oz-in Torque, 257° Rotation)
  • Gear ratio: 7:1
  • Voltage range: 4.8V - 8.4V
  • No-load speed at 4.8V: 1.75 sec/60° (5.7 RPM)
  • No-load speed at 6.0V: 1.40 sec/60° (7.1 RPM)
  • No-load speed at 7.4V: 1.20 sec/60° (8.6 RPM)
  • Stall torque at 4.8V: 1680 oz-in (120.4 kg.cm)
  • Stall torque at 6.0V: 2100 oz-in (151.2 kg.cm)
  • Stall torque at 7.4V: 2450 oz-in (176.4 kg.cm)
  • No-load current at 4.8V: 150mA
  • No-load current at 6V: 160mA
  • No-load current at 7.4V: 200mA
  • Stall current at 4.8V: 2000mA
  • Stall current at 6V: 2500mA
  • Stall current at 7.4V: 3000mA
  • Motor type: Brushed DC
  • Direction with increasing PWM signal: Counterclockwise
  • Maximum PWM range: 500-2500μsec
  • Maximum PWM range (continuous): 900-2100µsec
  • Travel per μsec: 0.13°/µsec
  • Maximum rotation: 257° (0.75 turns)
  • Pulse amplitude: 3-5V
  • Deadband width: 4μsec
  • Wire gauge: 22AWG
  • Connector type: 3-Position TJC8 Servo Connector [MH-FC]
  • Intellectual property: Patented

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Estimate shipping

You may also like