The ServoCity 6A BEC / Voltage Regulator (6-24V Input, 5V, 6V, 8.4V, 12V Output, Screw Terminals) is a versatile component designed to reduce input voltage to one of four selectable output voltages. It features screw terminals that accommodate 14-26AWG stranded wires, making it highly adaptable for integration within the goBILDA® ecosystem. This device is commonly referred to as a Battery Eliminator Circuit (BEC) in the R/C hobbyist community, eliminating the need for additional batteries by providing the necessary voltage for various components. In electrical engineering, it is recognized as a switching regulator, specifically a buck converter, which efficiently steps down voltage from its input. The BEC requires an input voltage at least 1V higher than the selected output voltage, which defaults to 5V but can be adjusted to 6V, 8.4V, or 12V using an included jumper. It is crucial to ensure that the total current drawn by connected devices does not exceed 6A to prevent damage. Note: Ensure motors powered by this BEC do not exceed a stall current of 6A, as higher currents, such as those from Yellow Jacket Planetary Gear Motors, may cause incompatibility.
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.