Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
DC Gearmotor
Nominal Voltage: 6V
No Load RPM: 100
Stall Current: 1.6A
Stall Torque: 70 oz-in
Shaft Diameter: 3 mm
This Pololu 298:1 Micro Metal Gearmotor has a long 0.365" (9.27 mm), D-shaped metal output shaft that matches the Solarbotics RW2 - Large Rubber Wheel and the Pololu Wheel 42x19 mm (Pair) . The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch), or you can use Pololu's Pololu Micro Metal Gearmotor Bracket (pair) or Pololu Micro Metal Gearmotor Mounting Bracket (Extended-Pair) , which are specifically designed to securely mount the gearmotor while enclosing the exposed gears.
These motors are intended for use at 6 V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 - 9 V range. Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.
