Description
Physical Specs:
- Overall Length: 133.5mm (5.26 in)
- Maximum Diameter: 37mm (1.46 in)
- Output Shaft size: 6mm (0.24 in) with 0.5mm deep flat
- Weight: 0.776 pounds
- Mounting Geometry: Six, M3 tapped holes on a 31mm bolt circle
- Maximum thread depth: 3.5mm. Do not go beyond this, or you can damage the plate and stop the motor.
- Electrical Connection Geometry: 6-pin connector for motor power and encoder contact
- Gear Material: Steel
- Body Material: Steel with plastic encoder housing
- Lubrication: Included with gearbox
- Shaft Hardness: 45-50 Rockwell C
- Wire Gauge: 18 AWG
Performance Specs:
- Gearbox Reduction: 60:1
- Voltage: 12 volt DC
- No Load Free Speed, at gearbox output shaft: 105 RPM
- Force Needed to Back-Drive: 19.2 oz-in
- Gearbox Output Power: 14W
- Stall Torque: 593 oz-in
- Stall Current: 11.5A
- Output counts per revolution of Output Shaft (cpr): 1680 Pulses
- Nominal Voltage: 12 Volt DC
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
