Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
Lynxmotion SES-V2 Arduino Compatible Dual 1.2A Motor Controller for LSS (LSS-2MC)
Dual Channel 6-21VDC, 1.2 A H-Bridge Motor Driver Module
Compatible with the Lynxmotion Smart Servo (LSS)
Input: Lynxmotion Serial Protocol (when using the Lss2MC code)
Arduino Nano bootloader installed & Arduino IDE compatible
The Lynxmotion SES-V2 Arduino Compatible Dual 1.2A Motor Controller for LSS or LSS-2MC (Lynxmotion Smart Servo To Motor Controller) module was designed as a multi-purpose, Arduino programmable board intended to "bridge the gap" between a Lynxmotion Smart Servo (LSS) serial bus and one or two electromechanical devices operating on PWM input like brushed DC motors (used to rotate fans, pumps or wheels for example), or LEDs.
The onboard motor controller chip also allows for control of one bipolar stepper motor using all four pins. Although a default program is included when shipped, it can be re-programmed using the standard Arduino IDE software to communicate with the onboard motor controller acting as a standard Arduino board.
Example use of the LSS-2MC with the LSS
Features
Dual 1.2A H-Bridge motor driver (MP6508GR-P)
USB Type-C connector
2x LSS connectors allow for daisy chaining
Input / Output A3 pin under the USB Type-C (Unpopulated / Solder pads only)
LED (red): Tx-Rx USB serial activity
LED (green): Power LED (PWR)
Arduino Nano bootloader installed & Arduino IDE compatible
Lynxmotion Smart Servo (LSS) mounting pattern
Same form factor as the LSS - Power Hub / LSS - 2IO Board / LSS - 5VR Board
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.