Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
iFlight Centurion X8 O3 6S HD (No Receiver, no Battery)
Advances cinelifter technology with custom electronics
Incorporates innovative A-frame truss arms for stiffness
Optimizes airflow with AeroShell to cool components
Features a quick-release battery system for efficiency
Delivers max speed of 160km/h with ample wind resistance
The iFlight Centurion X8 O3 6S HD (No Receiver, no Battery) represents a significant advancement in cinelifter technology, developed through a collaboration between 2RAW and iFlight. This drone is equipped with custom-designed electronics, including motors and a unique Thunder 8-in-1 ESC, known for its superior filtering capabilities. The integration of the 2RAW Thunder H7 Flight Controller enhances its performance, making it a formidable 6s craft. Additionally, it features advanced GPS chips with an enlarged antenna for rapid and precise satellite acquisition.
The Centurion incorporates advanced truss arms with an A-frame design, ensuring exceptional stiffness while maintaining a lightweight structure, which contributes to its outstanding performance. Its innovative camera mount, crafted from 7075 aero-grade aluminum, allows for adjustable angles between 10 to 50 degrees. This mount is designed to keep propellers out of the camera's view and is supported along both horizontal and vertical axes to reduce payload resonances, providing increased support as the camera angle rises for higher speeds.
The AeroShell of the Centurion not only gives it a distinctive appearance but also optimizes airflow around the drone. Engineered with the assistance of PhD students, it regulates airflow to cool the ESC and directs air away from the flat top plate as speed increases. The shell also acts as a barrier against dirt infiltration into the electronics. The thermal cooling system ensures consistent airflow across the electronics, with an aluminum heatsink and fan assembly on the O3 Air Unit to prevent overheating, even in extreme conditions.
The Centurion features a quick-release battery system that enhances efficiency in demanding filming environments. This system uses battery straps and carbon plates, allowing for swift battery swaps without the need for individual tie-downs, thus maximizing productivity.
1x Centurion X8 O3 6S HD BNF
4x GEMFAN 8046 CW propeller
4x GEMFAN 8046 CCW propeller
2x Albatross LHCP 5.8GHz SMA FPV Antenna
1x XT90 Male to XT60 Female Adapter Wire
4x iFlight Lipo Strap 20*300mm
2x iFlight Lipo Strap 15*250mm (Black)
1x XT90 Smart Smoke Stopper
272 x 272 x 96 mm (L x W x H)
Frame: 384 mm wheelbase
Geometry: Squashed-X
Flight Controller: Thunder H743
Electronic Speed Controller: Thunder 80A 8-IN-1
Video Transmission: DJI O3 Air Unit
Motor: XING2 2812 1150KV
Propellers: GEMFAN 8046
Maximum Speed: 160 km/h
Maximum Takeoff Altitude: 7000 m
Maximum Hover Time: Approximately 6 minutes with 6S Lipo 5600mAh battery
Maximum Cruising Time: Approximately 5 minutes with 6S Lipo 5600mAh battery
Maximum Wind Speed Resistance: Level 8
Operating Temperature Range: -10° to 40° C
Antennas: Dual
GNSS: GPS, SBAS, Galileo, QZSS, Glonass
Weight: 1837 g (without battery)
Takeoff Weight: 2695 g Approx.(With 6S 5600mAh battery)
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.