iFlight BLITZ Mini F7 Stack (E55 Mini 4-IN-1ESC)

iflight-rcSKU: RB-Ifl-216
Manufacturer #: BF15682

Price  :
Sale price $119.99

Shipping calculated at checkout

On Demand See due date

This is an On Demand item and is not normally stocked. We will order it for you along with our next purchase from the supplier.

* Delays depend on the order frequency from each supplier and the approximate arrival date is indicated in the due date. Returns are not accepted on On Demand and Clearance Items except when they are found defective, in which case the product may be repaired or replaced at RobotShop's discretion.

Payments and Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Venmo Visa Klarna

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • iFlight BLITZ Mini F7 Stack (E55 Mini 4-IN-1ESC)
  • Features STM32 F722 for enhanced performance
  • Incorporates ICM42688 gyro for precise control
  • Supports DShot and other protocols for versatility
  • Includes 8MB blackbox for data logging
  • Offers plug-and-play DJI HD VTX Connector

The iFlight BLITZ Mini F7 Stack (E55 Mini 4-IN-1ESC) features an enhanced circuit design that incorporates superior components to reduce electrical noise. This product is equipped with a DJI HD VTX Connector, allowing for a plug-and-play experience without the need for soldering. The flight controller includes indicator LEDs to facilitate visual debugging, enhancing the user experience.

The flight controller is built around the STM32 F722 MCU and integrates an ICM42688 gyro and DPS310 barometer. It supports six UARTs and features an OSD chip for on-screen display capabilities. The device also includes a blackbox flash memory of 8MB for data logging. The mounting pattern is 20x20 mm with a 4mm PCB hole diameter, and it is designed to accommodate M3 screws with silicon grommets for secure installation.

The ESC supports a 2-6S Lipo input and is capable of handling a constant current of 55 Amps with a burst capacity of 65 Amps. It is equipped with a current sensor and supports various protocols including DShot150, DShot300, DShot600, MultiShot, and OneShot. The ESC firmware is based on BLHeli 32, ensuring reliable performance.

Note: If the ESC is to be used in the iH3 O3 Frame kit, it is necessary to remove the capacitor after receiving the ESC before installation.

  • 1x iFlight BLITZ Mini F7 Stack (E55 Mini 4-IN-1ESC)
  • 1x BLITZ Mini F7 V1.2 Flight Controller
  • 1x BLITZ Mini E55 4-IN-1 2-6S ESC
  • 1x Silicon grommets
  • 1x Wire harness for F7 Flight Controller
  • 30.5 x 27 mm

BLITZ Mini F7 Stack E55 Mini 4IN1ESC - Dimensions

  • MCU: STM32 F722
  • Gyroscope: ICM42688
  • Barometer: DPS310
  • OSD Chip: AT7456
  • Flash Memory: 8MB (Blackbox flash)
  • UART Ports: 6
  • Motor Outputs: 4x (SH1.0 connector)
  • I2C Serial: SDA / SLA pads
  • Smartaudio / IRC Tramp VTX Protocol Supported
  • LED Controller: Yes
  • Beeper Pad: Yes
  • Firmware Target: IFRC-IFLIGHT_BLITZ_F722
  • ESC Mounting Holes: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws
  • Supports 2-6S Lipo Input
  • ESC MCU: G071
  • Constant Current: 55 Amps
  • Burst Current: 65 Amps
  • Current Sensor: Yes
  • BEC: No
  • Current Rate: 200
  • Supports: DShot DShot150/300/600/MultiShot/OneShot
  • ESC Firmware: BLHeli 32
  • ESC Target: IFLIGHT_BLITZ_G071_01 32.9

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Estimate shipping

You may also like