Provides accurate longitude, latitude, time, altitude
Supports I2C and UART output for broad compatibility
The Gravity: GNSS GPS BeiDou Positioning Module w/ RTC - I2C&UART integrates satellite positioning capabilities with a real-time clock (RTC). It automatically acquires satellite time based on a preset calibration period, ensuring precise calibration of the onboard RTC chip. This process effectively mitigates time errors that may arise during prolonged operation or accidental disruptions.
The system conserves power by automatically disconnecting the GNSS chip after calibration, thereby reducing overall power consumption compared to GNSS-only solutions. Users can also configure the module to function continuously as a positioning device, providing accurate data on longitude, latitude, time, and altitude.
The module supports two data output types: I2C and UART, and is compatible with Arduino, ESP32, Raspberry Pi, and other mainstream control devices. It is particularly suitable for applications requiring extended operational hours and high-precision timekeeping, such as astronomical observation timers, NTP servers, and outdoor wireless sensor time synchronization.
This module offers a significant improvement over traditional GNSS modules by incorporating the ability to deactivate the GNSS when not in use, leaving only the RTC module active to maintain time, thus achieving lower power consumption.
1x Gravity: GNSS Positioning & Timing module
1x GPS / BeiDou Active Ceramic Antenna (IPEX1 Connector)
1x Gravity 4P sensor cable
1x 10P connector
32 x 42 mm
Operating Voltage: 3 to 5V DC
Output Signal: I2C/UART
GNSS IC: L76K
GNSS Accuracy: 2.0m CEP
First Positioning Time: 30s for cold start, 2s for hot start
Operation Current: 46mA with GNSS enabled, less than 1mA with GNSS chip off
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.