The Centroform EZFORM LV 1827 110V Tabletop Vacuum Forming Machine has an opening to attach your vacuum source and an additional outlet to add an electric pump, if needed. A Shop vac or similar vacuum removes a lot of air quickly but it does not have a lot of torque. A pressure sensitive valve closes automatically when the vacuum is no longer able to suction and what is left can be evacuated by an electric pump, if needed. All stainless steel welded construction.
Features: • Patent pending • Maintenance free (Forming area) • Small internal chamber allows quicker suction • Symmetrically heating element engineered for uniform heat distribution to critical areas with no dead spots • Forms plastics up to 1/4'' • Precut plastic (white, clear food safe, black and other colors) is available • Additional outlets are integrated into the unit which allows additional (storage tanks - vacuum pumps- shop vacs) to be connected to the unit, if needed, opens automatically when suction is applied • Operator's manual included • Works with all formable plastics such as Styrene, Acrylic or Plexiglas, Pet-G etc. • Can be used for production, prototyping, magnetic letters and many more • Depth of draw up to 7 inches depending on mold shape and plastic • UL and CE certified components • Operates on household 110-120 AC current (also available in 210-240 volts single phase for international customers) • Welded metal quick load plastic frame (adjustable to accommodate different plastic thicknesses) slides down quickly before plastic starts to cool • Limited lifetime warranty and free technical support
thinner material will heat up and be ready for form within 48 seconds if the heater has been on for 10 minutes heating prior with plastic pushed up flush to heaters. .060 doesn't like the heat and turns white from too much heat if flush. I am going to try to secure .060 again to it, but have the plastic sheet within an inch or so of being flush to let the air circulate instead of making white heat marks on the plastic
H
HPI
Easy to use
We are very pleased with the machine and everyone was excited to learn how to use it. We are an art department that uses it to make product mockups. It is only used maybe a few times a month. We use a Robinair 15600 vacuum pump to provide the suction. Sometimes it's a little tricky to get the plastic sheets secured in the frame. It usually takes two of us to get it aligned and held in place. It doesn't take up much space. We store it on a wheeled cart with the pump and sheets of plastic on the shelves below. Assembly and operational instructions could use some illustrations. Additional videos would also be beneficial. Overall, works great for us.
n
nathan
frame needs work
I am happy with the unit,but had to retool the frame some. Forming area is small then stated for a good vacuum seal. Keep in mind I'm using 0.118 thick tabs with the robinair 15800 I think it was. Work great, but second the previous review about the framework. Still a great little machine till I buy a bigger pricier model.
J
Jay
Good, but frame is poor
Overall, this is a good product. The only downside is the frame that holds the plastic. The frame uses friction twist handles which hold the frame in position on the vertical columns. The twist handles are far too fiddly, and could do with a much simpler design. The frame is also oversized for the table. I plan on rebuilding my own frame to mitigate these issues. That should be unnecessary, given the cost of the product. Hopefully Centroform will rethink the frame (and offer a reasonable upgrade if they do.)
Estimate shipping
Refund Policy
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.