Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
PWM DC Motor Controller
Potentiometer: resistance value of 100K ohms, wire length of 20cm, opening of 8mm
Working voltage: 6 to 30V
Output voltage: actual input voltage at a percentage (as indicated by the regulator)
Rated current: 6A
The DC PWM Motor Speed Controller CCM5D 16khz, 6 30VDC, 6/8A Stepless Speed Control Switch, 6V/12V/24V LED Display features a large 0.56 inch 3 digit LED display numbers, allowing for viewing under the most adverse conditions. The display range of the 3 digit LED display is 000 100, with a displayed 066, indicating a 66% PWM output duty cycle. This controller is adjustable from 0% to 100%, and is suitable for DC motors or DC loads within 5A, with a peak current of 8A. It also incorporates a push key, with a push closing and push opening function.
Before wiring the controller, ensure that the power is off. Connect the wires according to the wiring diagram. Then turn on the power and adjust the potentiometer. The LED display will indicate the PWM output duty cycle. Push the key to close the controller, and push again to open.
Warning: Do not reverse the positive and negative power loads, as this will damage the controller and change the motor direction. Also, do not interchange the positive and negative wires of motors.
1x Speed Controller
Size: About 79 mm x 42 mm x 25 mm, or 3.11 inches x 1.65 inches x 0.98 inches.
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.