Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
Relay can activate applications with voltage levels as high as 125VAC (1A @ 24VDC)
Toggled via hobby radio control gear.
The Dimension Engineering PicoSwitch Radio Controlled Relay is a relay switch that you toggle via hobby radio control gear. You can use PicoSwitch to quickly and easily control anything from a digital camera shutter to an electric squirt gun to home lighting and more. You can activate applications with voltage levels as high as 125VAC without having to know anything about microcontroller logic levels or transistors because the relay offers full electrical isolation from your receiver electronics.
The Dimension Engineering PicoSwitch plugs into a standard hobby radio control receiver as easily as a servo does. You connect the load that you want to toggle using PicoSwitch's wear resistant screw terminals. Depending on the channel you use, you will then be able to control the relay by moving your radio's control stick up or down, left or right, or another method you desire.
Picoswitch has a status LED on the bottom. The LED will light up when the relay switch is on, and vice versa. It will also tell you if your radio link is too weak by flashing repeatedly.
The relay is a single pole single throw switch. Its typical lifetime is 100,000 to 1,000,000 switching cycles, depending on how heavy a load you are using. The relay is normally open when unpowered.
Applications:
Control of lighting systems on RC planes, boats, cars.
Control of digital cameras in aerial photography.
Control of auxiliary weapons in RC combat tournaments.
Control of low power home lighting systems.
Control of nearly any low powered application that can be toggled with a switch.
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.