Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
Cytron Dual Channel DC Motor Driver
With bi-directional control for 2 brushed DC motors
Supports both locked-antiphase and sign-magnitude PWM operation
Maximum current: 10 A continuous and 30 A peak (10 s) for each channel
Motor voltage range: 5 - 30 V
Speed control PWM frequency up to 20 kHz
Has 2 activation buttons for fast testing
Note: No Reverse Polarity Protection at Vmotor, please double-check the polarity before power-up.
The 10A 5-30V Dual Channel DC Motor Driver is the dual-channel version of MD10C which is designed to drive 2 brushed DC motors with a high current of up to 10 A continuously. Like MD10C, it also supports locked-antiphase and sign-magnitude PWM signal.
It is using full solid-state components which result in faster response time and eliminate the wear and tear of the mechanical relay. Fully NMOS H-Bridge for better efficiency and no heat sink is required.
A good product for quick development of tests for motor driving and control. Especially convenient for driving two motors at the same time. I have used 5 of these units so far without any problem. One side for low current (2A) and the other side for higher current (10A), but not continuous. Always stays cool.
R
Riccardo
Works very well - good purchase
A handy device plenty of power available, and the provided connectors are very useful.
V
Valerian
Very gooood!
It's more than I expected! The increase and the decrease of the rotation speed almost instantly it's what I appreciate the most.
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.