Sabertooth Dual 5A R/C 6-18V Regenerative Motor Driver (R/C)

Dimension EngineeringSKU: RB-Dim-30
Manufacturer #: Sabertooth 2x5 R/C

Price  :
Sale price $59.95

Shipping calculated at checkout

Stock  :

Re-stocking soon See due date

Notify me when this product is in stock

Payments and Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • Dual Motor Controller: 5A, 6-18V
  • R/C control with servo leads
  • Synchronous regenerative drive
  • Ultra-sonic switching frequency
  • Thermal and over-current protection
  • Lithium battery protection mode

The Sabertooth Dual 5A R/C 6-18V Regenerative Motor Driver (R/C) specifically optimized for use in radio controlled vehicles. It is suitable for small robots, cars and boats, and especially well suited for the Antweight and Beetleweight classes of fighting robots.

Sabertooth Dual 5A R/C 6-18V Regenerative Motor Driver (R/C)- Click to Enlarge

Out of the box, it can supply two DC brushed motors with up to 5A each. Peak currents of 10A are achievable for a few seconds. Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor.

Features

  • Includes exponential control, autocalibration and built-in mixing.
  • The operating mode is set with the onboard DIP switches.
  • Synchronous regenerative motor driver
  • Thermal and overcurrent protection
  • Built in 5V BEC can provide power to a microcontroller or R/C receiver.
  • Lithium cutoff mode allows safe operation with lithium ion / polymer packs
  • Ultra-sonic switching frequency
  • Silent operation.
  • Dimension Engineering 2x5 R/C motor controller
  • Mounting hardware (2 screws, 2 nuts)
  • Quick start Guide
  • Example R/C vehicle wiring diagram
  • Size: 1.8" x 1.6 " x 0.5"
  • 45 x 40 x 13 mm 
  • 5" (13cm) servo cables

Sabertooth Dual 5A R/C 6-18V Regenerative Motor Driver (R/C)- Click to Enlarge

  • 18g / 0.6oz
  • Input Voltage:

- 6V to 18V
- 6-12 cell NiMH or NiCd
- 2s-4s LiPo
- 6V or 12V lead acid (not 18+V lead acid!) 

  • 5A continuous per channel, 10A peak

Customer Reviews

Based on 7 reviews
57%
(4)
14%
(1)
29%
(2)
0%
(0)
0%
(0)
Y
Youa
Amazing product.

Bought to be put into one of Lesu Skid Steer. I love how it was simple/ small to install. Fits perfectly inside. Works perfectly as well. Enough to power the dual-motor with no issues. Overall would buy again if needed.

R
Robo
not best

Not the Best Controller. Battery eliminator circuit has poor performance. If you plan to implement 1 or 2 servos to your receiver, good luck . I should have tried the 1amp bec version of this controller. It would be nice if they provided more info regarding the specs of the bec

R
Ron
Speed control

Good product. Easy to hook up and does what it is supposed to do. A little pricey but worth it.

W
Wayne
All good

I installed one of the two I ordered into a Bruder D-4 tractor. I adjusted the end points and it works well. The other one I installed into a Tonka tractor and it also works well. I am very confident it will work for a long time.

A
Anthony
It's an OK system

I used this with a Tamiya dual motor gearbox. While this did provide the power to the small motors that are in that kit, it was prone to brown-outs. In addition to the brownouts, The unit frequently overheated, & the thermal protection would activate. That's a GOOD thing it has, BUT......with those small motors, it's also a BAD thing. They're so tiny, they shouldn't overheat the controller. Perhaps I can re-purpose the 2X5 to power the linear actuators on the Bruder D5 conversion to a working RC that I'm building, rather then as the power for the drive motors in the gearbox. HOPEFULLY by using this unit in an application that's not under constant load, I can make use of it.

Estimate shipping

You may also like